Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in Dallas, TX
Garage door panel replacement in Dallas typically costs $180 to $500 per panel, depending on the material, insulation level, and whether the panel is a standard size or a custom order. Most single-panel replacements can be scheduled within 48 hours, and we handle the full job, from removing the damaged section to rebalancing the door. If you’re looking at a dented, warped, or weather-battered panel, call Brock Garage Doors Dallas at (254) 269-5837 and we’ll give you a written price before any work begins.
Panel replacement is one of those repairs that looks simple from the outside but goes wrong quickly when it isn’t done right. A new panel has to match the existing door in profile, thickness, and color. If it doesn’t, the door binds, light gaps appear at the seams, and the springs work harder than they should. We do this work as part of our broader Garage Door Repair service, which means the same technician who replaces your panel also checks the balance, rollers, and hinge points while the door is open. The goal isn’t just a new panel. It’s a door that opens and closes like it did before the damage happened.
Wade Mercer, owner at Brock Garage Doors Dallas, runs every job to The Garrison Standard: show up in the scheduled window, put the price in writing before the first bolt turns, do the work by the book, and leave the site clean. That standard applies to a single panel replacement exactly the way it applies to a full door rebuild.
When You Need Panel Replacement
Not every damaged panel means you need a full door replacement. Here’s what actually calls for panel work, based on what we see across Dallas neighborhoods from Lake Highlands to Oak Cliff:
- Impact damage from a vehicle or mower. A riding mower that throws a rock or a car bumper that kisses the door on the way into the garage leaves a dent or a crack. If the panel is creased or the steel is torn, replacement is the only real fix.
- Hail damage across one or two panels. North Texas hail storms can leave a door looking like a golf ball. When the damage is limited to the lower panels, replacing those sections costs far less than a new door.
- Rust through the steel face. Dallas humidity and the occasional garage flood accelerate corrosion. Once rust has eaten through the face of the panel, patching and painting won’t hold. The panel needs to come out.
- Bowed or warped panels from heat. A door that faces west in a Dallas summer takes direct sun for hours every afternoon. Over time, the steel can warp enough that the panel no longer sits flush against the weatherstripping.
- Broken panel stiles or hinges that ripped out. When the hinge screws tear through the panel, the structural integrity of that section is gone. A new hinge on a stripped panel is a temporary fix that fails again within weeks.
- Insulation failure. If you can feel heat bleeding through one section of an insulated door in August, the panel’s core has likely broken down. Replacing it restores the thermal barrier and cuts your cooling load.
If your panel is cracked, torn, or structurally compromised, there’s a safety angle worth knowing. The panels are what the springs and cables lift every time the door cycles. When a panel fails, the door can shift in the tracks, which puts uneven load on the torsion spring system. That’s not a DIY fix. High-tension springs store enough energy to cause serious injury, which is why panel work should always be handled by a trained professional who can release and reset the tension safely.
Our Panel Replacement Process
Here’s how a panel replacement works when you call us. This is the same sequence we’ve run on doors across Dallas, from Preston Hollow to Casa View.
- You call and we quote the visit. A live person answers at (254) 269-5837, day or night. We schedule a window that works for you and confirm it before the tech rolls out.
- We inspect the door and identify the panel specs. The technician measures the panel, checks the profile and color code, and confirms the manufacturer. We service Clopay, Amarr, Wayne Dalton, and Craftsman doors, so the match is based on your actual system, not a guess.
- We hand you a written price. Before any work starts, you get the full cost in writing, parts and labor. The number on that sheet is the number on the invoice when we finish.
- We replace the panel and check the door’s balance. After the new panel is in place, we run the door through a full cycle and check the spring tension, cable alignment, and hinge points. If something else is failing, we show you what we found and quote a fix only if you want it done.
- We clean up and walk you through the guarantee. The site is left the way we found it. Your repair is covered in writing for 365 days. If that panel or the work we did on it fails within the year, we return at no charge.
Every step runs to The Garrison Code: arrival windows honored, price in writing, work done by the book, site left clean, guarantee in writing. That’s not a sales pitch. It’s the standard our location agreed to when we joined the Garrison Partners network.
Panel Replacement Pricing in Dallas
Panel replacement cost depends on three things: the panel material, the size, and whether it’s a stock or custom profile. Here’s what you can expect in the Dallas market:
| Panel Type | Typical Cost (Panel + Labor) | Notes |
|---|---|---|
| Single steel panel, non-insulated | $180 – $300 | Common on older doors; stock sizes usually available |
| Single steel panel, insulated | $250 – $400 | Better thermal performance; worth considering if your door faces west sun |
| Aluminum or composite panel | $300 – $500 | Common on modern doors from Clopay and Amarr |
| Custom-painted or wood-look panel | $350 – $600 | Requires color matching to existing door; longer lead time |
Two things drive cost up. The first is a custom profile. If your door is discontinued or a specialty model from Wayne Dalton or Craftsman, the panel may need to be fabricated or sourced direct from the manufacturer, which adds time and money. The second is what we find when the panel comes off. Rusted hinges, worn rollers, or a spring that has lost tension all need addressing before the new panel will cycle correctly. We show you what we find before we quote it. Nothing gets added to the invoice without your sign-off.
The cheapest option is rarely the cheapest in year two. A mismatched panel that sort of fits will strain the door’s hardware. The written price you get from us includes the panel, the labor, and the rebalancing, and every part of that work is covered by the 365-Day Done Right Promise for a full year. Estimates are free. Call (254) 269-5837 and we’ll give you a real number before we ever touch a tool.
FAQs – Panel Replacement
How much does garage door panel replacement cost in Dallas?
Most single panel replacements in Dallas run between $180 and $500, depending on material, insulation, and whether the panel is a stock profile or a custom order. You’ll get the exact price in writing before any work starts when you call (254) 269-5837 for a free estimate.
Can you match a panel to my existing garage door?
Yes, in most cases. We service Clopay, Amarr, Wayne Dalton, and Craftsman doors, and match the panel’s profile, color code, and thickness to your existing door. If your door is discontinued, we’ll source the closest available match and show you what it looks like before we install it.
Is it cheaper to replace panels or buy a new door?
Replacing one or two panels is almost always cheaper than a full door replacement. If three or more panels are damaged, or the door is over 15 years old with failing springs, rusted tracks, or needs sensor calibration, a new door often makes better financial sense. We’ll give you both numbers in writing and you decide.
Can you replace my garage door panel the same day?
If the panel is a standard size that we carry or can pick up locally, same-day replacement is common. Custom or discontinued panels take longer because they have to be ordered. Call (254) 269-5837 and we’ll tell you what’s realistic for your specific door before you book.
Does the panel replacement guarantee cover the rest of the door?
Our 365-Day Done Right Promise covers the panel replacement and the related work we performed, including rebalancing and any hardware we touched during the job. If the covered repair fails within the year, we return and correct it at no additional charge.
Why Dallas Calls Brock Garage Doors for Panel Work
Panel replacement is precise work, and the difference between a good job and a bad one shows up in the details. The panel has to sit flush. The weatherstripping has to seal. The door has to balance. We train our technicians on the systems we see most across Dallas, so the fix applied to your Clopay or Amarr door is the fix that was designed for that door, not a generic workaround.
Every technician who arrives at your home is background-checked and uniformed. You know who you’re letting in before the van pulls up. And when the work is done, you get the guarantee in writing. Not a verbal promise that evaporates after the truck leaves, but a one-year written commitment that we honor.
This is how we operate as an independently owned location within the Garrison Partners network. Local business, national accountability. It means we answer to the homeowner in Lakewood or Mesquite the same way we answer to the standard we signed onto. That’s the whole point.
If you need a panel replaced, or you’re not sure whether replacement or a full door makes more sense, call us at (254) 269-5837. A live person answers, day or night, and the estimate is free. We’ll give you the number in writing and the guarantee along with it.
Written by Wade Mercer, Owner at Brock Garage Doors Dallas, serving Dallas.