Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterSpring Repair in Dallas, TX
Garage door spring repair in Dallas typically costs between $180 and $340 for a standard torsion spring replacement, and most jobs are completed the same day the call comes in. When a spring breaks, the door will not open, even with the opener running. Springs carry the full weight of the door every time it moves, so this is not a repair to put off or attempt on your own. At Brock Garage Doors Dallas, we send a background-checked, uniformed technician to your home, hand you a written price before the first bolt turns, and back the work with our 365-Day Done Right Promise in writing. If you need spring repair in Dallas today, call us at (254) 269-5837. A live person answers, day or night.
Spring repair is the most common garage door emergency we see in Dallas, and it falls squarely under our broader Garage Door Repair work. The heat and humidity here are hard on springs. Dallas summers push garage temperatures well past 110 degrees, and that repeated thermal cycling shortens spring life. Most standard torsion springs are rated for about 10,000 cycles, which works out to roughly seven to ten years of normal use. But in Dallas, where doors often cycle more than twice a day and heat stress accelerates metal fatigue, springs can fail in as little as five years. When they do, the repair needs to happen before the door is safe to operate again. We work on doors from Clopay, Amarr, and Wayne Dalton, among others, so the fix is specific to your system, not a generic off-the-shelf guess.
Key Takeaways
- Dallas spring repair typically runs $180 – $340 for torsion spring replacement.
- A broken spring means the door will not open. Do not keep trying the opener.
- Heat and humidity in Dallas shorten spring life compared to national averages.
- Brock provides a written price before work starts and a written 365-day guarantee.
- Call (254) 269-5837 and a live person picks up, any hour.
When You Need Spring Repair
Most homeowners know something is wrong before they know it is a spring. Any of these signs means the spring system has failed or is on the way out. If you are seeing them, call us before the next cycle breaks something else.
- The door will not lift. You hit the opener and hear the motor run, but the door stays put. That is the classic torsion spring failure. The opener is not built to lift a 300-pound door on its own, and every attempt strains the motor, cables, and track.
- A loud bang from the garage. Torsion springs snap loudly when they break. If you heard a sound like a gunshot or a heavy steel cable letting go, that is the spring releasing its load all at once.
- The door has a visible gap in the spring. A torsion spring sits above the door on the header. When it breaks, you can see a clean separation where the coil once met. Do not stand under the door to inspect it.
- The door is heavy to lift by hand. Pull the red release cord and try lifting the door. If it takes real effort to raise and it drops back down when released, the spring is no longer counterbalancing the weight.
- The door opens a few inches and stops. A spring that has lost tension, but not fully snapped, can cause the door to stall partway up. The opener keeps tripping its force limit and reversing.
- One side of the door sits lower than the other. A worn spring set where one coil has failed can cause uneven lift. The door will look off-level in the opening and the cables may slack on one side.
If any of these match what you are dealing with, call (254) 269-5837. We will tell you over the phone what we think is going on, give you a straight answer on cost range, and schedule a window we actually keep.
Our Spring Repair Process
Our approach follows The Garrison Standard, the operating discipline Brock Garage Doors Dallas uses on every job. It is not complicated. It just means we do what we say we will do, in the order we say we will do it.
- You call, a live person answers. No voicemail tree, no callback queue. You tell us what happened, we ask the right questions, and we schedule a specific window. Nights, weekends, holidays included.
- The technician arrives in uniform. Every Brock tech is background-checked and identifiable. You know who is at your door before you open it. The truck is marked, the uniform is real, and the tech introduces himself by name.
- Inspection and a written price. The technician inspects the spring, the bearing plates, the cable drums, and the door balance. Then you get the full price in writing. The number you approve is the number you pay. Nothing changes at the truck.
- The repair happens by the book. Old spring comes off, new spring goes on. The wind count is set to match your door weight and height. Cables and drums are checked and re-tensioned. Any worn parts found during the work are shown to you before they are swapped.
- The door is balanced and tested. We run the door through full open and close cycles with the opener disengaged, then re-engaged. The goal is a door that holds at half-open without drifting up or down.
- Clean site, written guarantee. The work area is left cleaner than we found it. You receive the written 365-Day Done Right Promise covering the repair. If it fails within a year, we return at no charge. That is not a verbal assurance. It is on the invoice.
We built this process because Dallas homeowners have been burned by techs who quote one number on the phone and a different number at the door. That does not happen with us. The price is in writing before we touch the door. Our service area includes downtown, North Dallas, Lake Highlands, Preston Hollow, Oak Cliff, and the surrounding suburbs.
How Much Does Spring Repair Cost in Dallas?
Spring repair in Dallas typically runs $180 to $340 for a standard torsion spring replacement. Extension spring systems, found on older doors, run lower, usually $140 to $220. The final number depends on the spring type, wire size, door weight, and whether you replace one spring or both. Most Dallas homes with double-wide doors need both springs replaced at once so the door lifts evenly and neither spring carries an unfair share of the load.
| Repair Type | Typical Cost in Dallas |
|---|---|
| Single torsion spring replacement | $180 – $260 |
| Both torsion springs (recommended) | $250 – $340 |
| Extension spring pair | $140 – $220 |
| Add a safety cable (extension systems) | $30 – $65 |
| Bearing or drum replacement (if worn) | $40 – $90 added |
What moves the number on your particular door:
- Door weight and height. A 16-foot double door needs a heavier spring than a 8-foot single door. Heavier wire costs more.
- One spring or two. If one spring on a two-spring door is broken, replacing both is the sound move. The unbroken one has the same fatigue and will fail soon. Doing both at once costs less than two separate visits.
- Spring cycle rating. Standard springs are rated for 10,000 cycles. Upgraded springs with a higher cycle rating cost more upfront and last longer. We will show you both options with pricing.
- Brand of door. Doors from Clopay, Amarr, or Wayne Dalton sometimes need spring-specific wind counts or torque settings. Our techs are trained to match the spring to the specific door, not whatever is on the truck.
Estimates are free. Always. Call (254) 269-5837, describe your door and what happened, and we will give you a real price range over the phone before anyone comes out.
Why Brock Garage Doors Dallas Handles Spring Repair Differently
Every garage door company in Dallas claims to fix springs. Very few put their price in writing before the work starts, and fewer still put a full-year guarantee on the invoice. We do both, on every job, no exceptions.
Brock Garage Doors Dallas is an independently owned and operated location within the Garrison Partners network, a group with operating discipline running back to 2001. We agreed to work to The Garrison Standard because it matches how a repair company should operate: show up in the scheduled window, price in writing, work by the book, leave the site clean, and stand behind the repair for a full year. That last part is formal. It is called the 365-Day Done Right Promise. If a covered repair fails within that window, we return and correct it at no additional charge. If the fix needs a second visit, that visit is free. No negotiation, no fee, no fine print.
Our technicians are background-checked and uniformed on every call. They are trained to service springs and openers across eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters because spring tension is not universal. The correct wind count for a Craftsman door is not the correct wind count for a Wayne Dalton. We match the repair to your system.
A note on safety, because it is important enough to say plainly: torsion springs are under enormous tension. Even a small mistake during removal can release that energy into a hand, face, or chest. We have responded to calls where a homeowner tried a DIY spring replacement and ended up with a damaged door, a broken window, or worse. Do not attempt this repair yourself. Call (254) 269-5837. We will handle the tension so you do not have to.
Which Spring Systems We Service in Dallas
We work on both common setups found in Dallas homes:
Torsion Springs
The torsion spring is the thick coiled spring mounted on a steel shaft above the door opening. It stores lifting energy by twisting rather than stretching. Most Dallas homes built in the last 25 years use this system. When it breaks, the door becomes dead weight and the opener cannot compensate. Replacement requires winding the new spring to the exact tension for your door weight and height.
Extension Springs
Extension springs run along the horizontal tracks on either side of the door. They stretch when the door closes and contract when it opens. They are more common on older Dallas homes and lighter single-car doors. These systems use safety cables routed through the spring, which is a required safety component. When an extension spring breaks without a safety cable in place, it can become a projectile. We replace the cables on every extension spring job.
FAQs – Spring Repair
Can you fix a garage door spring the same day in Dallas?
Yes. We carry the most common spring sizes and wire gauges on our trucks, and most Dallas spring repairs are completed the same day you call. Call (254) 269-5837 and we will confirm a window for today or tomorrow.
Is it cheaper to replace one spring or both?
Replacing one spring is cheaper upfront, but on a two-spring door it costs you more within a year. The unbroken spring has identical wear and will fail soon. Replacing both at once is the lower total cost over the life of the repair. We will show you both prices and you decide.
How long do garage door springs last in Dallas?
Most springs are rated for about 10,000 cycles, which in Dallas typically works out to five to eight years given the heat and frequent cycling. A spring that fails at year five in a Dallas garage is not unusual. Upgraded cycle-rated springs are available and cost more upfront.
Can I use my garage door opener if the spring is broken?
No. Running the opener with a broken spring strains the motor, strips gears, and can snap cables or throw the door off its tracks, which may require Track Realignment as well. Disconnect the opener and leave the door closed until the spring is replaced. Call (254) 269-5837 and we will get it handled.
Does Brock Garage Doors Dallas guarantee spring repairs?
Yes. Every spring repair carries the 365-Day Done Right Promise in writing. If the repair fails within a full year, a Brock technician returns and corrects it at no charge. The guarantee is printed on the invoice, not implied.
Call Brock Garage Doors Dallas for Spring Repair
If your garage door spring has failed, or you notice the door getting heavy and uneven, call (254) 269-5837. You will get a live person on the line, not a recording. We will give you an honest price range over the phone, schedule a window we keep, and send a background-checked, uniformed technician to your door. The full price comes in writing before any work begins, and the repair is backed in writing for a full year. That is how a spring repair should go in Dallas.
Written by Wade Mercer, Owner at Brock Garage Doors Dallas, serving Dallas.