Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Cable Repair Across Irving
Garage door cable repair in Irving typically costs $130 – $250, and most snapped or frayed cables can be replaced the same day by a technician who carries the right parts on the truck. That’s the straight answer. When a cable lets go, the door usually hangs crooked, jams halfway, or drops hard to one side, and continuing to run the opener makes the damage worse. We serve every part of Irving, from the ranch neighborhoods north of Highway 183 down through Las Colinas and Valley Ranch. Call (254) 269-5837 and a real person answers, day or night.
Why Brock Garage Doors Dallas Is Irving’s Preferred Garage Door Cable Repair Company
Irving homeowners call us because we put the price in writing before any work starts. Not a verbal range. Not an estimate that shifts once the tech sees the door. The number you approve is the number on the invoice, every time. Our Garage Door Cable Repair team works on eight major brands, so the fix fits your specific door instead of a generic part forced into place.
Wade Mercer, who leads Brock Garage Doors Dallas, holds every tech to The Garrison Standard: show up in the window we gave you, write the price down, do the work by the book, clean the site, and back it with a 365-day written guarantee. That guarantee is not a verbal promise. If the repair fails within a full year, we come back and correct it at no charge. We’re an independently owned and operated location within the Garrison Partners network, running since 2001 to a discipline most competitors won’t match. Every tech who arrives in Irving has passed a background check and wears a uniform, so you know exactly who you’re opening the door to.
Styles & brands we work with
Garage Door Cable Snapped in Irving
Garage Door Cable Snapped in Irving is a job we handle week in and week out, especially in the older subdivisions north of Highway 183 where original torsion springs have cycled their last. A snapped lift cable puts the full weight of the door on one side, and if the door is a heavy wood carriage model, that side load can bend the track or tear the bottom bracket clean off. The repair usually runs $130 – $250, which covers replacing both cables, checking drum condition, and rebalancing the door so it lifts evenly.
What It Involves on the Truck
We carry both 7-foot and 8-foot cable sets for residential doors, along with replacement drums and bottom brackets for the common Irving door profiles. On a snapped cable we do not splice, patch, or shorten. The cable gets replaced, the drum gets inspected, and the door gets run through a full cycle under load before we call it done.
The Torsion Spring Connection
In north Irving’s builder-grade steel doors from the 1980s and 1990s, a snapped cable is often the second failure, not the first. The torsion spring, the thick coiled spring mounted above the door that bears most of the lifting load, breaks first. That break sends a shock through the system, and the cable is what fails next. If we find a broken spring during a cable repair, the spring replacement runs $180 – $340 on top of the cable work, quoted and approved in writing before we touch it.
Garage Door Cable Replacement in Irving
Garage Door Cable Replacement in Irving is the fix for cables that haven’t snapped yet but are visibly frayed, rusted, or slipping off the drum. Frayed cable strands are a warning sign, not a wait-and-see situation. A cable that frays halfway through can hold for weeks, then snap at 6 a.m. with your car still inside the garage. Replacing cables before they fail costs the same $130 – $250 as a snap repair, and it saves you the bent track and damaged panel that usually come with a hard drop.
When Both Cables Get Replaced
We replace both cables on every job, not just the one that failed. Cables wear at the same rate. If one snapped, the other is typically stretched to within a season or two of the same failure. On a mid-century ranch door in Irving with original wooden panels, the extra weight of the wood makes even cable wear critical. Both cables get replaced, and the door comes back into balance.
Las Colinas Carriage Doors
In Las Colinas, carriage-house doors with decorative iron hinges and heavier wood or composite panels put real load on the cable system. Humidity corrosion on the hinge pins and drum surfaces can make cables bind and chew themselves apart. Our techs carry penetrating oil on every Irving visit, which is not the standard in neighboring Dallas where steel-clad modern doors dominate. The right lubricant on a drum can mean the difference between a $180 cable job and a $400 drum-and-cable replacement.
Trusted Brands We Service in Irving
Our technicians are trained on Wayne Dalton, Clopay, Amarr, and Raynor systems, plus the opener brands that pair with them, including Genie in Irving. Why that matters: a builder-grade Wayne Dalton door from an 1980s Irving subdivision uses different cable lengths and drum profiles than an Amarr carriage door in Las Colinas. We stock the common Irving sizes on the truck, so most cable repairs finish in one visit. If a proprietary drum or bottom bracket needs ordering, we tell you that upfront, with the price, before any work begins.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Cable Repair Problems We See in Irving Homes
- Humidity-seized carriage hinges in Las Colinas: Decorative iron hinges absorb moisture from Irving’s humid air and bind, which throws uneven load onto the cables. Penetrating oil on the hinge points and cable drums during service keeps the door lifting square.
- 1960s wood door warp north of Highway 183: Triple-digit summers and spring humidity warp original wooden door panels, pulling cables off their drums. The fix is cable replacement plus track realignment, which runs $120 – $240 on top of the cable work.
- Hail-dented aluminum doors from the 2000s: Spring hailstorms dent lightweight panels just enough to change track geometry. Cables then ride the drum at an angle and fray. We realign the track edges and replace the cables in the same visit.
- Snapped cables after spring failure in older subdivisions: Builder-grade 10,000-cycle springs on 1980s and 1990s doors fail suddenly and take the cable with them. When a customer calls about a snapped cable and we find a broken spring, both get priced and repaired transparently.
Pricing for Garage Door Cable Repair in Irving, TX
A typical garage door cable repair in Irving runs $130 – $250, and the price is written down and handed to you before the work starts. That includes both cables, drum inspection, and rebalancing the door. Here’s the line-item breakdown for the work we do most often in Irving:
| Service | Irving Price Range |
|---|---|
| Garage Door Cable Repair | $130 – $250 |
| Torsion Spring Replacement | $180 – $340 |
| Track Realignment | $120 – $240 |
What moves the price within that range is door weight, drum condition, and whether a spring or track issue is bundled in. We never add a surprise line item. If we find something else wrong during the repair, we show you, explain it, and write the new number down for your approval before touching it. Estimates are free. Call (254) 269-5837 and we’ll walk you through the ballpark over the phone.
We Also Serve Cities Near Irving
Beyond Irving, Brock Garage Doors Dallas covers Garage Door Cable Repair in Irving and the surrounding cities: Dallas, Balch Springs, Addison, and Garland. If you live in a neighboring city and have a cable dragging or a door hanging crooked, call (254) 269-5837. Scheduling and dispatch coordinate from our Dallas-Fort Worth office, and crews serve Irving locally.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Cable Repair in Irving
Irving’s heat and humidity work against wood carriage doors in two ways: the wood swells and warps, which changes the door’s balance and pulls cables off their drums, and the humidity corrodes metal hinge and drum surfaces so cables bind and fray faster. We see this most in Las Colinas where carriage-house designs are common. Regular lubrication of the hinges and drums, plus a cable and balance inspection each spring, keeps the system lifting evenly. Call (254) 269-5837 to schedule a check.
Yes, in our experience with the older subdivisions north of Highway 183, upgrading to high-cycle springs when you replace snapped cables is the smart money. Those 1980s and 1990s builder-grade doors came with 10,000-cycle springs, and when they break, they take the cables with them. High-cycle springs last two to three times longer and cost the same $180 – $340 price range as a standard spring replacement. It’s a same-visit decision we’ll quote in writing. Call (254) 269-5837 and we’ll give you the number before starting.
Yes. Our trucks carry cable sets and drums sized for builder-grade Wayne Dalton doors, the ones installed by the thousands in 1980s Irving subdivisions. Those doors use specific cable lengths and drum profiles that generic cable stock doesn’t always fit. We also stock Wayne Dalton bottom brackets for the common Irving profiles. If your specific model needs a proprietary part, we’ll tell you upfront and price it before ordering. Call (254) 269-5837 with your door’s make and model if you want to confirm parts availability before booking.
Hail dents change the shape of the panel just enough to shift the track edges inward, and that makes the door bind. When the door binds, the opener strains, and the cables take uneven load and start to fray. The fastest fix is a track realignment, which runs $120 – $240 in Irving, plus cable replacement at $130 – $250 if they’ve already started to wear. We’ll inspect both and give you a written price before any work starts. Call (254) 269-5837.
We replace both cables, even when only one has snapped. Cables on the same door wear at nearly the same rate. If one failed, the other is stretched and fatigued, and replacing just the snapped side leaves the door unbalanced and prone to another failure within weeks. On mid-century ranch doors in Irving, where the wooden panels add real weight, even cable tension matters even more. Both cables are included in the $130 – $250 price. Call (254) 269-5837 to get a free estimate over the phone.
Written by Wade Mercer, Owner at Brock Garage Doors Dallas, serving Irving and the surrounding DFW area.