Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterSingle Car Door in Dallas, TX
Most single-car garage doors in Dallas run 8 to 9 feet wide, and replacing or installing one typically costs between $950 and $2,100 depending on material, insulation, and whether any framing or hardware work is required. We give you that price in writing before a single bolt turns, and every installation carries a 365-day guarantee. That’s the short answer. The longer one is that a single car door is not simply a smaller version of a double door. It has its own weight calculations, spring sizing, and track geometry, and getting any of those wrong means a door that binds, sags, or eats cables within months.
Brock Garage Doors Dallas handles single car door work daily across Dallas and the surrounding suburbs. We’re an independently owned and operated location within the Garrison Partners network, and every job runs to The Garrison Standard: show up in the window, put the price in writing, do it by the book, leave the site clean, and stand behind the work for a full year. If you’re weighing a new single door against repairing the one you have, call (254) 269-5837 and we’ll walk you through the numbers. For a broader look at what full Garage Door Installation involves, that page covers the larger job end to end.
When You Need Single Car Door
A single car door reaches the end of its service life the same way any other door does, but the symptoms show up earlier when it’s the only door you use every day. Here’s what we see in Dallas homes that tells us it’s time:
- The door leans or binds on one side. This usually means a worn roller, a tired cable, or a track that’s pulled out of alignment. Left alone, it gets worse and puts strain on the opener.
- You hear metal-on-metal grinding. That’s often a roller bearing that’s failed or a hinge that’s worn through. If you ignore it, the panel starts taking damage.
- The door sags when it sits halfway up. Springs lose tension over time. A door that won’t hold mid-travel is a sign the spring system has weakened, whether torsion or extension.
- Panels are cracked, warped, or rusting through. North Texas weather cycles through intense sun, hail, and humidity, and older steel panels without a good undercoat show it within a decade.
- You’ve already replaced the opener twice. Often the opener isn’t the problem. It’s the door’s weight or balance that’s killing it. A new single door solves the root cause.
- The door is original to a home built before the 1990s. Those early Dallas suburban builds often have uninsulated panels and hardware that was never meant to run this long.
Our Single Car Door Process
We run the same discipline on a single car door that we run on every Garage Door Installation in Dallas project. The size of the door doesn’t change how the job runs. Here’s the order of operations, and you’ll know each step before we start:
- Measure and inspect. We check the opening width, headroom, side room, and the condition of the existing tracks, springs, and mounting points. A single door in a tight Dallas garage can have as little as a few inches of clearance, and that dictates which track radius we use.
- Written quote. You get a line-item price on paper: panel cost, hardware, spring, track, haul-away of the old door, and labor. No verbal estimate, no number that moves when the crew arrives. The invoice matches the quote.
- Panel and hardware selection. We stock and install doors from Clopay, Amarr, and Wayne Dalton, among others. You choose the style and insulation level that fits your garage, and we apply the right hardware for that specific brand and weight class.
- Old door removal and track prep. We pull the existing door, spring, and track, then inspect the framing. If a stud is soft from moisture or a previous install left stripped anchors, we fix that before anything new goes up.
- Installation and balance. The new door goes in, the springs are wound to the correct tension for the door’s exact weight, and we run the full cycle a minimum of three times to confirm balance at every point of travel.
- Clean site and walk-through. We haul away the old door and packaging, sweep the work area, then walk you through operation and maintenance. Your 365-day guarantee is on the paperwork in your hand before we leave.
Single Car Door Pricing in Dallas
We quote by the door and the opening, not by a generic “garage door” line item. A single car door installation in Dallas generally lands in these ranges:
- Basic steel, non-insulated: $950 – $1,300 installed, including haul-away of the old door.
- Steel with polystyrene insulation: $1,200 – $1,600 installed. This is the most common pickup for Dallas homeowners who park in the garage and want a cooler space in August.
- Vinyl-backed or polyurethane insulated steel: $1,500 – $1,900 installed. Tighter seal, higher R-value, and usually a longer panel warranty.
- Custom wood or wood-look composite: $1,800 – $2,400 and up, depending on species, panel style, and finish work. We’ll tell you straight if this doesn’t make sense for your opening.
What moves the number is the weight class of the door, the spring conversion (if we’re going from extension springs to a torsion spring setup, which we recommend on most Dallas homes), and any framing correction the opening needs. We don’t bury that cost. It’s in the written quote, before we start work. The estimate is free. If you want a firm number for your specific opening, call (254) 269-5837.
FAQs – Single Car Door
How much does a single car garage door cost in Dallas?
A single car garage door in Dallas typically costs between $950 and $2,100 installed, with basic steel at the lower end and insulated or wood-look options at the higher end. That price includes removing and hauling away the old door. Add $150 to $350 if the opening needs framing repair or a spring conversion. Call (254) 269-5837 and we’ll give you a written quote for your exact opening.
How long does a single car door installation take?
Most single car door installations in Dallas take between three and five hours from start to finish, including removal of the old door and full cleanup. If we’re also converting the spring system or repairing framing, that can push the job to a full day. We arrive in the window we give you, and the work doesn’t stretch into a second day unless we find something we didn’t expect, and we’ll tell you before we touch it.
Is it cheaper to repair my single car door or replace it?
Repair is usually cheaper in the short run: a spring replacement runs $180 to $340, and a cable repair runs $150 to $275 in Dallas. But if your panels are rusting through, the rollers have wallowed out the track, or the door is older than 20 years, you’re likely to keep paying for repairs over the next two or three years. When the repair total starts crossing half the cost of a new door, replacement makes more sense. We’ll run the numbers both ways and give you the quote, not a sales pitch.
Can you install a single car door the same day?
Yes, in most cases. We carry common single car door sizes and hardware on the truck, and if your opening is standard and the framing is sound, we can often complete the install the same day. If you need a specific panel style or a custom size, we order it and schedule the install within the week. Call (254) 269-5837 to check today’s availability. A live person answers, 24/7.
What brands of single car doors do you install?
We install single car doors from Clopay, Amarr, and Wayne Dalton, and we maintain the training to service systems from those brands plus Craftsman and several others. The brand choice affects panel thickness, insulation type, and hardware compatibility, and we match the spring and track to the door’s actual weight rather than using a one-size-fits-all kit.
Why Dallas Homeowners Call Brock for Single Car Doors
The Garrison Standard isn’t a marketing phrase. It’s the operating rule we agreed to when we joined the Garrison Partners network, which has been running service operations since 2001. It means the price you approve is the price you pay, the tech in your garage has passed a background check and wears a uniform, and if the installed door fails within 365 days, we return and correct it at no charge. That’s in writing, on every job. If you’re comparing quotes, ask the other company what their written guarantee covers and whether they’ll put it in writing before you sign anything. Then call (254) 269-5837 and get ours. Free estimate, no pressure, and a straight answer to every question.
Written by Wade Mercer, Owner at Brock Garage Doors Dallas, serving Dallas.