Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterNew Door Installation in Dallas, TX
New garage door installation in Dallas typically runs $1,100 to $2,800 for a complete door and hardware package, with most single doors landing between $1,400 and $1,900 installed. We complete most installations the same day we arrive, and every job gets a written price before the first bolt comes out. If your current door is beyond repair, or you’re tired of patching a door that’s been failing for years, a new door is often the cheaper long-term move. Call (254) 269-5837 and we’ll walk you through what your specific opening needs.
Brock Garage Doors Dallas is an independently owned and operated location within the Garrison Partners network, working to The Garrison Standard: show up in the window, put the price in writing, do the work by the book, leave the site clean, and stand behind it for a full year. That standard applies to every new door we hang, from a basic steel panel door to a fully insulated Clopay unit. If you’re still weighing repair against replacement, our Garage Door Installation in Dallas page covers the full scope of what goes into a proper install.
When You Need New Door Installation
Not every door problem means replacement. But when these show up, you’re usually past the point where another repair makes sense:
- The door has rust-through or panel rot. Surface rust can be treated, but when panels are crumbling at the edges or the bottom rail is soft, the door’s structure is gone. In Dallas, we see this most on west-facing doors that catch full afternoon sun and on doors in older East Dallas homes where the original steel has been up for 30 years.
- The door is off its tracks more than once. A door that jumps the track repeatedly has a structural or balance problem. After the second or third time, you’re spending money on a door that’s telling you it’s done.
- The springs have snapped and the door is 15+ years old. Spring replacement is a normal repair, but on an old door with worn rollers, hinges, and a tired opener, that spring money goes further toward a new system.
- You’re tired of the noise, the drafts, or the look. An insulated door with nylon rollers is dramatically quieter and seals better. If your garage shares a wall with a bedroom or you use the space as a workshop, that upgrade matters in Dallas summers when the garage hits 110 degrees.
- The opener is undersized for the door. Older heavy wooden doors often outlast their openers. Replacing the door with a modern, lighter steel unit can extend the opener’s life and reduce strain on the entire system.
Our New Door Installation Process
Every new door installation follows the same sequence, and you’ll know the price before step one begins:
- Measure and inspect the opening. We check the rough opening width and height, headroom above the door, side room, and the condition of the existing track mounts. An uneven floor or out-of-square opening changes which door and track setup will work.
- Written estimate handed to you. You get a line-item price covering the door, hardware, track, springs, labor, and haul-away of the old door. That number is in writing before we take a single panel off the truck. If the invoice doesn’t match at the end, you don’t pay the difference.
- Remove the old door and hardware. We strip the old door, tracks, springs, and opener brackets down to the opening. This is where we catch hidden issues like rotted jamb wood or loose header bolts that get addressed before the new door goes in.
- Install the new door, track, springs, and weather seal. We hang the new door, set the torsion springs (the coiled springs above the door that carry the lifting load), install the track, and fit the bottom weather seal tight against the Dallas floor grade.
- Balance test and safety check. We run the door through full cycles, verify the balance point, test the auto-reverse, and confirm the opener’s force settings match the new door weight.
- Clean the site and walk you through it. We haul away the old door and packaging, show you how to operate and maintain the new door, and hand you the written 365-day guarantee before we leave.
New Door Installation Pricing in Dallas
Here’s what new door installation runs in the Dallas market, based on what we’ve been quoting across the metro:
- Single-car steel door, non-insulated: $1,100 – $1,500 installed. This is your basic 8×7 or 9×7 non-insulated door from manufacturers like Wayne Dalton or Craftsman. Functional, but it transfers heat and noise.
- Single-car steel door, insulated: $1,500 – $1,900 installed. Polystyrene or polyurethane core, noticeably quieter, and keeps the garage more livable during Dallas’s heat. Clopay and Amarr both make solid options in this range.
- Double-car steel door, non-insulated: $1,500 – $2,000 installed. A 16×7 door with standard hardware and springs.
- Double-car steel door, insulated: $1,900 – $2,800 installed. The polyurethane-core doors from Clopay and Amarr sit in this band, with the higher end covering windows, upgraded finishes, and thicker gauge steel.
What moves the price: door size, insulation type, window inserts, steel gauge, and whether your existing track can be reused or needs replacement. Garage doors are heavy systems under spring tension, so a proper install isn’t a handyman job. The $1,400 to $1,900 range for a single insulated door includes labor, new springs matched to the door weight, and haul-away of the old door.
Every quote is free. Call (254) 269-5837 and a live person answers, day or night. We’ll give you a real number over the phone based on your door size and preferences, then confirm it in writing at the house before work begins.
FAQs – New Door Installation
How much does a new garage door cost in Dallas?
A new garage door in Dallas costs $1,100 to $2,800 installed, with most single-car doors landing between $1,400 and $1,900. The price depends on door size, insulation, window options, and steel gauge. Call (254) 269-5837 for a free estimate with exact numbers for your opening.
How long does new garage door installation take?
Most new door installations take three to five hours from arrival to cleanup. We schedule a window that works for you, and we complete the job the same day, including haul-away of the old door.
Can you install a new door if my current door is off its tracks?
Yes. We remove the old door and hardware completely, then build the new system fresh from the opening. An off-track old door doesn’t complicate a new installation as long as the framing and mounting points are intact.
Is it cheaper to repair or replace my garage door?
That depends on the door’s age and condition. If the door is under ten years old and the failure is isolated, like a broken spring or a single damaged panel, repair is usually the cheaper move. If the door is 15+ years old and has multiple failing components, replacement is often the better value. We’ll tell you straight which way the math goes, and the written estimate lets you compare directly.
Call Brock Garage Doors Dallas for New Door Installation
If you’re ready for a new door or just need an honest number to compare, call (254) 269-5837. A live person answers around the clock, including nights and weekends. You’ll get a free estimate with the price in writing before any work begins, and your new door is covered by our 365-Day Done Right Promise: if it fails within a full year, we return and make it right at no charge.
Written by Wade Mercer, Owner at Brock Garage Doors Dallas, serving Dallas.