Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Cable Repair for Dallas Homeowners
A snapped or frayed cable takes your garage door out of service fast. The door either won’t open at all, or it opens crooked and binds hard against the track. We’re Brock Garage Doors Dallas, and we’ve handled cable failures across Dallas for years, from Far North Dallas to Balch Springs and everywhere between. Most cable repairs run $130 – $250, and our techs carry replacement cable, drums, and hardware on the truck so the fix usually happens in a single visit. Wade Mercer leads our crew, and every job gets a written price before work starts plus a 365-day written guarantee. Call (254) 269-5837 and a live person answers, day or night.
Garage Door Cable Replacement
Garage Door Cable Replacement is what’s needed when the steel cable that lifts your door has frayed, stretched, or separated. These cables work under extreme tension. When one fails, the door can’t lift evenly, and the remaining cable takes double the load. That’s a dangerous situation. In Dallas, you’ll typically pay $130 – $250 for Garage Door Cable Repair in Dallas, depending on cable length, drum type, and whether both sides need doing. We replace cables in pairs as standard practice, because if one has failed, the other is usually close behind. Most replacements at Brock Garage Doors Dallas are done same-day, with the written quote in your hand before a single bolt turns.
Cable Pair Replacement
We always replace both cables on a door, even when only one has snapped. The unworn cable on the other side has been through the same cycles and will fail soon. Matching both keeps the lift balanced and the drum wear even on both sides.
High-Cycle Cable Upgrade
For doors that see heavy daily use, we offer high-cycle replacement cables built from heavier-gauge steel. They last noticeably longer than standard cables on doors that open and close more than four times a day. Ask the tech whether your usage pattern justifies the upgrade when we’re on site.
Styles & brands we work with
Garage Door Track Repair
Garage Door Track Repair addresses bent, misaligned, or loose track sections that cause the rollers to bind or jump. Track damage often shows up as a grinding noise, a door that hesitates partway up, or visible gaps between the roller assembly and the track. In the Dallas market, track repair runs $120 – $240 depending on how many sections are involved and whether the track needs re-anchoring to the wall. Our techs check every track repair for the underlying cause, often a cable or spring issue that threw the door out of alignment in the first place. Fixing track without fixing the cause just means another call in three weeks.
Track Realignment
A door that’s been pulled off center by a snapped cable usually bends or loosens the vertical track. We re-align both tracks, check the mounting brackets, and confirm the door travels true before we call the job done. You get a door that moves smoothly instead of shuddering on the way up.
Track Bracket Securing
Dallas soil shifts, and garage walls move with it. Loose or pulled track brackets are common, especially in older homes in North Dallas and University Park. We re-secure brackets to the framing with proper hardware, not drywall anchors, so the track stays put under load.
Garage Door Hinge Replacement
Garage Door Hinge Replacement covers the steel hinges that connect your door panels and keep them folding correctly as the door travels the track. Hinges wear out, rust through, or snap when a door is forced while jammed. The repair itself is quick, usually $110 – $220 depending on how many hinges we replace and whether they’re center or end hinges. We stock common hinge sizes on the truck, so this is rarely a two-trip job. At Brock Garage Doors Dallas, we check all hinges during any cable repair because a bad hinge can throw the door’s balance off enough to strain the cables.
Multi-Hinge Replacement
When one hinge has failed from metal fatigue, its neighbors are usually showing similar wear. We replace them in sets rather than one at a time. That keeps the panel alignment even and prevents the same problem from walking down the door a month later.
Rust-Damaged Hinge Remediation
Garages in Red Oak and Seagoville see real humidity, and rusted hinges are a regular call for us. We swap rusted hardware for galvanized replacements and lubricate the pivot points so the door doesn’t squeak or bind afterward.
Garage Door Track Replacement
Garage Door Track Replacement is the fix when track sections are too bent, rusted, or worn to safely carry the door. If the rollers have carved grooves into the track or a section is kinked from an impact, patching it isn’t enough. In Dallas, full track replacement typically costs $120 – $240 per section, with most jobs running $240 – $480 for both sides. We replace track in matched pairs so the door rides symmetrically. Every track replacement at Brock Garage Doors Dallas includes roller inspection, because old rollers on new track just transfer the wear problem. The written quote you approve is the exact price you pay.
Full Dual-Track Replacement
When both vertical tracks are compromised, we replace the full run on each side, including the curved sections. The replacement uses the same gauge steel as your original door, or thicker where the door is heavier. The result is a door that runs quietly and stays in its lane.
Sectional Track Splicing
Some damage is confined to one straight section. We can splice in a new section when the rest of the track is sound, which saves you the cost of full replacement. We’ll only recommend this when the splice is as strong as the original run.
Garage Door Off Track
Garage Door Off Track means the door’s rollers have jumped out of the track, leaving the door hanging or wedged at an angle. It happens when a cable snaps, a spring breaks, or the door takes a hit from a car bumper. The repair cost lands between $120 – $240 for basic re-seating and adjustment, and climbs to $250 – $500 if panels or hardware were damaged in the derailment. This is a repair you should not attempt yourself. A door off track is under spring tension and weighs 150 to 300 pounds. Our techs secure the door first, then diagnose why it left the track before anything gets repositioned.
Cable-Triggered Derailment
Most off-track doors we see in Dallas have a snapped cable as the root cause. The door drops unevenly, twists, and the rollers pop free. We fix the cable, then re-seat the door, then run a full cycle test to confirm the track and rollers are still healthy.
Impact-Driven Derailment
If a car or a trash bin caught the door while it was moving, the track itself may be bent. We inspect every bracket and section before re-hanging the door. Straightening a kinked rail with the door still on it just creates a bigger problem later.
Garage Door Cable Snapped
Garage Door Cable Snapped is the most urgent call we get in Dallas. When a lift cable breaks, the door slams to one side or won’t move at all. The door is effectively locked in place and dangerous to force. Cable replacement runs $130 – $250, which covers both cables, drum inspection, and rebalancing. We answer the phone 24 hours a day, so when this happens at 6:45 a.m. and your car is stuck inside, a person picks up, not a voicemail. Most snapped-cable repairs in the Dallas area are completed same-day, with the written guarantee in your hand before we leave.
Emergency Cable Failure Response
Our techs treat snapped cables as a priority call. We’ll get a truck to you as fast as Dallas traffic allows, secure the door, and get it operational again. The price is written and agreed before any repair work starts, no surprises on the invoice.
Post-Snap Damage Inspection
A snapped cable often damages the drum, the rollers, or the track on its way down. We inspect the full system during every cable repair and show you what we find. You decide what to fix, with a written line-item quote for anything beyond the cable itself.
Brands We Service
Our techs work on Wayne Dalton and Clopay doors regularly across Dallas, and we stock the replacement parts that match their factory specs. Whether it’s a torque-master spring setup on a Wayne Dalton or a standard torsion system on a Clopay, we know the differences that matter during a cable repair. We also service Craftsman openers and doors, which covers a huge share of the homes in Addison and Balch Springs. These are the units we see most often, and we know their failure points and their hardware.
Whether your door carries a Clopay, Amarr, Wayne Dalton, or Craftsman badge, or any other make, we can fix it. Our parts inventory covers the common brands, and for oddball or discontinued hardware, we can order and have it in hand fast. The brand on the door doesn’t change how we work: written price first, 365-day guarantee, clean site when we leave.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Door lifts unevenly or tilts to one side. That’s the signature of a failing or snapped cable. The door is fighting against itself, and forcing it will bend the track and can snap the spring. Stop using it and call.
- Visible fraying or broken strands on the cable. A cable with a few broken strands is weeks, not months, from total failure. The cable is under hundreds of pounds of tension. When it goes, it goes violently.
- Loud bang from the garage followed by a jammed door. That’s usually the moment a cable or spring let go. Don’t hit the opener again. The door is now a hazard until a tech secures it.
- Door drops hard on the way down. If the door falls faster than it should, the cables may be losing tension or slipping on the drum. That’s a dangerous condition that gets worse every cycle.
- Rollers jumping out of the track. Once a door comes off track once, it will come off again, usually with more damage each time. Get it fixed before the door ends up hanging at 45 degrees.
Our Process, Step by Step
- 1
Call and talk to a person. You call (254) 269-5837 and a live person answers. We ask what’s happening with the door, confirm your address, and give you a straight answer about when a tech can arrive.
- 2
On-site inspection and written quote. The tech arrives in a marked truck, inspects the door, and hands you a written price before any work starts. You read it, ask questions, and approve it. Nothing happens without your sign-off.
- 3
Repair to The Garrison Standard. We replace the cable, inspect the drums, springs, rollers, and track, and repair what’s needed within the approved scope. Every repair is backed in writing for 365 days.
- 4
Full cycle testing. We run the door through multiple open and close cycles, check the balance, and adjust the opener force settings if needed. The door leaves our hands running like it should.
- 5
Clean site and clear paperwork. We leave your garage cleaner than we found it, walk you through what we did, and hand you the written guarantee. If anything covered fails within a year, we come back at no charge.
How Much Does Garage Door Cable Repair Cost in Dallas?
A typical garage door cable repair in Dallas runs $130 – $250, with most jobs landing near the middle of that range. Single-cable replacement sits at the lower end. Replacing both cables with new drums lands at the higher end. If the snapped cable bent a track section or damaged a roller, track realignment adds $120 – $240 to the total. What affects the price most is cable length, drum style, and the damage the cable did on its way out.
The free estimate we provide before any work starts includes the cable, the labor, the drum inspection, and the full-cycle testing afterward. You will not see an invoice number that differs from the quote you approved. We write it down, you sign it, and that’s the number. If a repair fails within 365 days, we return and fix it at no charge. That’s The Garrison Standard, and it applies to every job in Dallas, Garland, Garage Door Cable Repair - Irving, and everywhere else we serve in the metro.
Our Service Area Near Dallas
We run cable repair calls across the Dallas metro every day. Our trucks cover Garland, Irving, Addison, Balch Springs, Seagoville, University Park, Cockrell Hill, Heath, Red Oak, Far North Dallas, and North Dallas. Most cable repairs are completed same-day when you call before early afternoon, and we’re on the road for emergency cable failures around the clock. If you’re looking for Garage Door Cable Repair in Garland or Garage Door Cable Repair in Irving, the same crew and the same written guarantee apply. We also offer full home garage door repair services across the region.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Cable Repair in Dallas
Garage door cable repair is the replacement or re-tensioning of the steel lift cables that carry the door’s weight as it opens and closes. The cables connect the bottom of the door to the spring system, and when they fail, the door cannot safely move. Repair includes replacing both cables, inspecting the drums and rollers, and confirming the door is balanced.
Most cable repairs in Dallas take 60 to 90 minutes from arrival to completion. If the cable failure damaged the track or drums, the job may run closer to two hours. We carry common replacement parts on the truck so the work is usually done in one visit.
Cable repair in Dallas runs $130 – $250 for the standard job, which includes both cables and a full inspection. Additional damage from the cable failure, like a bent track or broken roller, adds to the total based on the written line-item quote. You always see and approve the full price before work starts, and the estimate is free.
Yes, we service Wayne Dalton, Clopay, Amarr, Craftsman, and all other major garage door brands. Our techs are trained on the specific hardware these brands use, including torque-master spring systems on Wayne Dalton doors. We stock OEM replacement parts for the brands we service most in Dallas.
Yes, we run same-day cable repair calls across Dallas and the surrounding metro. A live person answers the phone 24 hours a day, including nights and weekends, so you never wait on a callback for an emergency. Call (254) 269-5837 and we’ll get a truck headed your way.
Every cable repair we perform is covered in writing for 365 days under our Done Right Promise. If the repair fails within that window, we return and correct it at no additional charge. The guarantee is printed on your paperwork, not just mentioned verbally by a tech.
Clear the area around the door tracks and move vehicles out of the garage if possible. The tech needs about six feet of working space on each side of the door. No need to have tools or parts ready; the truck carries everything required for a standard cable repair.
Schedule Your Garage Door Cable Repair Service in Dallas Today
A snapped cable won’t fix itself, and every cycle you force on that door makes the damage worse. Call (254) 269-5837 now and a live person will answer, day or night. We’ll give you a straight answer on timing and a free, no-obligation written estimate before any work begins. Brock Garage Doors Dallas serves the entire metro with cable repair done through Garage Door Cable Repair in Dallas, backed by a 365-day written guarantee.
Written by Wade Mercer, Owner at Brock Garage Doors Dallas, serving Dallas since 2001.