Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Dallas?
Spring replacement in Dallas typically costs $180 to $340 for a standard torsion spring on a single-car garage door. Double-door systems with two springs generally run $300 to $550 when both springs are replaced at the same time, which most technicians recommend even if only one has snapped. Most Dallas homeowners can expect to pay at the lower end of that range for a single spring on a standard 7-foot door, while high-cycle springs, custom sizes, and same-day emergency calls push the price toward the top.
The good news is that spring replacement is one of the most predictable garage door repairs in Dallas. The parts cost is consistent, the labor window is tight, and a competent technician finishes the job in under an hour in most cases. What varies is the spring type, the door weight, and whether you’re replacing one spring or both. This guide breaks down exactly what you should expect to pay in the Dallas market in 2026, what drives the number up or down, and how to avoid paying for work you don’t need.
At Brock Garage Doors Dallas, we put the spring replacement price in writing before any work starts. The number you approve is the number on the invoice. No surprises at the door.
Spring Replacement Cost Breakdown (2026)
Here’s the breakdown for residential spring work in Dallas. These numbers reflect what we see across the market week to week, including parts and labor.
| Service Line Item | Typical Dallas Price Range (Parts & Labor) |
|---|---|
| Single torsion spring replacement (standard 7-ft door) | $180 – $280 |
| Single torsion spring replacement (heavy or 8-ft door) | $240 – $340 |
| Double spring replacement (both springs, standard door) | $300 – $480 |
| High-cycle spring upgrade (25,000+ cycles) | $260 – $420 per spring |
| Tension adjustment only (spring intact, door unbalanced) | $90 – $150 |
| Emergency after-hours call (weekend or overnight) | Add $50 – $100 to normal rate |
These ranges assume a standard residential garage door up to 8 feet tall. Custom doors, carriage-style wood doors, and oversized two-bay doors with heavier panels fall above these numbers because the springs themselves cost more and require more time to install safely.
One thing worth knowing: when one spring fails, the second spring is often near the end of its lifespan too. Both springs on a double-door system have cycled the same number of times. Replacing only the broken spring saves money today but typically means a second service call within a year. Most Dallas homeowners choose to replace both at once, which is why the double-spring price is the most common quote we give.
What Affects Spring Replacement Pricing in Dallas
A spring is a spring, but the final number on your written quote depends on several factors that are specific to your door and your situation. Here’s what actually moves the price in the Dallas market:
- Door weight and size. A 16-foot double door with insulated steel panels weighs more than a 9-foot single door with hollow panels. Heavier doors need larger springs with thicker wire gauge, and those springs cost more. Most Dallas homes built after 2000 have either a standard 7-foot or 8-foot door, but custom builders in areas like Lake Highlands and Preston Hollow often installed taller or heavier doors that need oversize springs.
- Spring type and cycle rating. Standard springs are rated for roughly 10,000 cycles, which translates to about 7 to 10 years of normal use in a Dallas household that opens the door twice a day. High-cycle springs rated for 25,000 or 50,000 cycles cost $60 to $120 more per spring but last two to three times longer. If you plan to stay in the house, the upgrade usually pays for itself.
- One spring or two. This is the biggest pricing decision. A single spring replacement is cheaper on the invoice, but if your door uses two springs, replacing both at once is the more cost-effective move over time. You pay for one truck roll, one labor window, and one warranty period instead of two.
- Time of call. A spring that snaps at 9:00 a.m. on a Tuesday costs one price. A spring that snaps at 9:00 p.m. on a Saturday costs a little more. Evening and weekend service is available across Dallas, and the emergency call add of $50 to $100 covers the technician’s off-hours time, not inflated parts pricing.
- Condition of adjacent hardware. If the spring failure damaged the torsion tube, cable drums, or center bearing, those parts add to the repair. A technician who checks the full assembly before quoting will catch this early. A technician who quotes the spring only and discovers the damage mid-job will hand you a revised number at the door. That’s exactly the situation our written-price-first policy eliminates.
- Parts warranty and labor guarantee. Cheap springs with no warranty lower the upfront price but shift all the risk to you. Our 365-day guarantee covers both the part and the labor. If a spring we install fails within a year, a technician returns and corrects it at no charge. That’s written on every repair we do in Dallas.
How to Save on Spring Replacement
Spring replacement doesn’t have to cost more than it should. Here are the moves that actually keep money in your pocket without cutting corners on the repair itself:
Replace both springs at once. The second spring costs less in labor when it’s done in the same visit. You avoid a second dispatch fee, a second diagnostic, and a second disruption to your day. Households in Dallas that open the garage three or four times a day (kids, commuters, home gyms in the garage) wear springs faster than average, which makes the dual replacement even more worthwhile.
Choose the right cycle rating for your usage. If you use the garage as a primary entry, a high-cycle spring rated for 25,000 or 50,000 cycles means you’ll replace springs roughly once every 15 to 20 years instead of every 7 to 10. The upfront premium is modest, and the long-term math favors the upgrade for most Dallas homeowners.
Get the quote in writing before work starts. This is less a tip and more a requirement. A written quote protects you from “found problems” that inflate the number mid-repair. We hand you the price before a single bolt turns, and that’s the number on the invoice. If you’re comparing Dallas garage door companies, ask each one directly: “Is the price you’re giving me now the price I’ll pay?” If the answer is anything other than a straight yes, that’s information worth having.
Handle it during regular hours when possible. If your spring snaps and the door is closed with your car inside, you don’t always have the luxury of waiting. But if the door is open and the vehicle is out, scheduling the repair for a weekday morning avoids the after-hours add-on. We answer calls 24/7, and a live person will help you decide whether the situation warrants an emergency dispatch or a scheduled visit.
For a free estimate on spring replacement in Dallas, call (254) 269-5837. You’ll get a straight number and a written quote before anything is ordered or installed.
Why Spring Replacement Costs What It Does in Dallas
Spring replacement is one of those jobs where the part itself is not the expensive piece. The cost is in the labor, and the labor is priced the way it is for good reason. A torsion spring operates under hundreds of pounds of tension. When it releases, it does so instantly and with enough force to cause serious injury to anyone in the path. That’s why this is not a DIY repair, and it’s why a trained technician’s time commands the rate it does.
In Dallas, the climate also plays a role. The heat and humidity of North Texas summers take a toll on metal components over time. Springs that live in garages that regularly exceed 100 degrees in July and August cycle through more thermal expansion and contraction than springs in milder climates. We see spring failures in Dallas houses across neighborhoods like Oak Cliff, Mesquite, Carrollton, and Richardson with a predictable pattern: original springs last 7 to 10 years, and replacement springs using OEM-grade steel with proper cycle ratings reach the same or better.
The technician’s job is not just swapping the part. It’s measuring the door, weighing the panels, selecting the correct wire gauge and spring length, winding the spring to the right tension, testing the balance, and verifying the safety reversal system. That process takes skill and the right tools, and it’s the reason the labor is worth what it costs.
What’s Included in a Spring Replacement Quote
When we quote a spring replacement in Dallas, the written price includes the full scope of the job. Nothing is hidden in a line item you never saw coming. Here’s what’s on the page:
- The spring itself, matched to your door’s weight, size, and usage.
- Labor for removal and installation, including safe unwinding of the old spring if it has not fully released.
- Inspection of the torsion tube and cable drums for damage caused by the break.
- Lubrication of the new spring and adjacent moving parts to reduce friction and wear.
- Balance test after installation, verifying the door holds position at mid-height.
- Safety reversal test, confirming the door reverses when it contacts an obstruction.
- The 365-Day Done Right Promise in writing, covering the new spring and the labor for a full year.
Some Dallas companies quote the spring only and then add lubrication, a balance adjustment, or a reversal test as “extras.” Those are not extras. They’re the job. If the quote doesn’t include them, ask why.
Our technicians are background-checked, uniformed, and trained to service eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. The spring on your door is matched to the system it’s part of, not swapped for whatever happens to be on the truck.
Dallas Spring Replacement: Step-by-Step
If you’ve never gone through a spring replacement before, here’s the sequence you should expect when you call us. It’s designed to be straightforward, and the price you’re quoted at the start is the price you pay at the end.
- Call and describe the door. A live person answers. We’ll ask about the door’s size, the type of spring (torsion above the door or extension on the sides), whether one or both springs are broken, and whether the car is trapped inside or out. This takes about five minutes.
- Receive a written price range by phone and a firm quote on site. Before the technician touches anything, you’ll have the exact number in writing. If the on-site inspection reveals something unexpected, we stop and show you exactly what changed and what it means for the price. You approve before we proceed.
- The technician installs the new spring. The old spring is unwound or removed safely. The new spring is installed, wound to the correct tension, and checked for balance. Cables and drums are inspected for damage from the spring break.
- The door is tested. We run the door through full open and close cycles, check the balance at mid-height, and test the safety reversal. The work area is left clean.
- You receive the written 365-day guarantee. If the spring or the labor fails within a year, we return at no charge. That’s confirmed on paper, not promised verbally.
Most single-spring replacements in Dallas are completed in 45 to 75 minutes from arrival. Double-spring jobs run slightly longer due to the extra winding and balance verification.
A Note on Safety
A torsion spring is not a routine DIY part. The spring stores hundreds of pounds of force, and if it releases while you’re working on it, the injury can be severe or fatal. Even the simplest-looking adjustment requires winding bars, the correct spring size, and experience managing stored tension. We recommend a trained professional for any spring work. The cost of a proper replacement is a fraction of the cost of an emergency room visit, and it’s the only way to get a written guarantee on the work.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Dallas?
Spring replacement in Dallas runs $180 to $340 for a single torsion spring and $300 to $550 for a double-spring replacement on a standard two-car door. High-cycle spring upgrades cost more but extend the replacement interval to 15 years or longer. Call (254) 269-5837 for a written quote on your specific door. Estimates are free, and the number doesn’t move once you approve it.
Is it cheaper to repair or replace a garage door spring?
Repairing a spring is not really a thing. Once a spring snaps, it’s done. The only question is whether you replace one spring or both. Replacing both at once costs $300 to $550 in Dallas, which is meaningfully cheaper than two separate single-spring visits that total $360 to $680 when you factor in the second truck roll and labor window. If your door has two springs and one fails, replacing both is the lower-cost path over the next 12 months.
How long does spring replacement take in Dallas?
Most single-spring replacements are done in 45 to 75 minutes on site. A double-spring replacement runs 60 to 90 minutes. The technician’s time includes removal of the broken spring, inspection of the torsion tube and cable drums, installation, winding, and the balance and reversal tests. Same-day service is available across Dallas for calls received before mid-afternoon, and after-hours calls are answered by a live person around the clock.
How often do garage door springs need to be replaced in Dallas?
Standard springs last 7 to 10 years in Dallas under normal use, which means about 10,000 open-and-close cycles. Homes that use the garage as a primary entry point may see failures sooner. High-cycle springs rated for 25,000 or 50,000 cycles can last 15 to 20 years in the same conditions. The North Texas heat contributes to metal fatigue, and we recommend a visual inspection of the springs every year as part of routine door maintenance.
Can you replace one spring instead of two?
Yes, you can replace just the broken spring for $180 to $340 depending on the door. The tradeoff is that the older second spring now carries an uneven share of the load and typically fails within 6 to 12 months, which means a second service call and a second labor charge. We give you both quotes in writing, and the choice is yours. Most Dallas homeowners with two-spring doors choose the dual replacement because the per-spring cost is lowest that way.
Is spring replacement covered by a warranty?
At Brock Garage Doors Dallas, every spring replacement is covered by our 365-Day Done Right Promise. If the spring or the labor fails within a full year, a technician returns and corrects it at no charge. The guarantee is in writing on every repair. We also service and repair equipment from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so the spring is matched to your system correctly the first time.
Free Estimate for Spring Replacement in Dallas
If your garage door spring has snapped, or if the door feels heavy and unbalanced, the fix is a phone call away. We answer live 24 hours a day, seven days a week, including weekends and holidays. You’ll speak to a person, not a phone tree.
The technician arrives in a window you approve, hands you a written price before any work starts, and backs the repair with a full-year written guarantee. That’s The Garrison Standard, and it’s the way we run every job in Dallas. For spring replacement or any other spring service in Dallas, call (254) 269-5837 now for a free estimate.
Written by Wade Mercer, Owner at Brock Garage Doors Dallas, serving Dallas since 2001. Wade has spent more than two decades in the garage door trade, and he still believes a written price and a one-year guarantee are the minimum standard, not a premium upgrade.
Pricing reflects the Dallas market as of 2026. Brock Garage Doors Dallas offers free estimates – call (254) 269-5837.
What Our Customers Say
"Opener was grinding. He found a stripped gear, replaced it, and tested the safety reverse twice. Left the garage cleaner than he found it."
- Trevor J."They treat the job like a mission. On time, no fuss, and they cleaned up their mess."
- Bonnie R."Found out the owner and a couple of the techs are veterans, and you can tell. Showed up exactly on time, in uniform, and did the job without wasted motion. Replaced a broken spring and a frayed cable."
- Ray D.